Roofing Manufacturer Systems in San Marcos, TX

Most commercial roofs in a portfolio carry a manufacturer's name somewhere in their paperwork, and that name tells a facility director what is under the foot: a sheet type, a seaming method, a set of approved details and a warranty form with its own conditions. For San Marcos, TX buildings, where hail and long summers test every seam, the question is less about brand loyalty and more about how a given system is installed, how it is repaired when it is damaged and how it is maintained until replacement.

Single-ply makers

Several manufacturers make single-ply sheets that are welded or adhered over insulation. Carlisle Syntec and its sister brand Versico, Johns Manville, Holcim Elevate and Sika Sarnafil all supply membranes that we work on, and Duro-Last is known for factory-fabricated sheets cut to the roof. Each has its own detail drawings, and we follow them when a patch or flashing is added.

Asphalt-based and liquid systems

GAF and Soprema supply layered and liquid-applied systems for low-slope roofs, with membrane plies, base sheets and flashing resins sized to match. Layered roofs hold up under rooftop traffic, and liquid flashings suit the awkward spots around curbs and pipes.

Roofing Manufacturers

GAF Commercial Roofing Systems

GAF commercial roofing systems in San Marcos, TX: how single-ply and asphalt-based assemblies age on big-box and fulfillment roofs, and how we maintain them.

Carlisle SynTec Roofing

Carlisle SynTec roofing in San Marcos, TX: TPO and EPDM single-ply systems on outlet and retail roofs, with curb, seam and tenant-unit repair and upkeep.

Johns Manville Roofing

Johns Manville roofing in San Marcos, TX: single-ply, built-up and insulation assemblies on campus-style roofs, with phased repair, upkeep and records.

Holcim Elevate Roofing

Holcim Elevate roofing (formerly Firestone Building Products) in San Marcos, TX: single-ply assemblies on medical and institutional roofs, with phased upkeep.

Sika Sarnafil Roofing

Sika Sarnafil roofing in San Marcos, TX: welded PVC membrane assemblies for food, grocery and distribution roofs, with seam, flashing and exhaust-zone care.

Versico Roofing Systems

Versico single-ply roofing in San Marcos, TX: how TPO, EPDM and PVC assemblies perform on flex-industrial and warehouse roofs, and how we maintain them.

Soprema Roofing and Waterproofing

Soprema roofing in San Marcos, TX: modified bitumen and liquid-applied systems for historic square storefronts and tight-access roofs, installed without flame.

Duro-Last Roofing

Duro-Last prefabricated PVC roofing in San Marcos, TX: custom-fabricated sheets for retail strips and small commercial roofs, with repair, upkeep and records.

Repairing a roof you did not install

Many roofs already in service were put down by someone else, and we repair what is there. We identify the membrane, test the substrate, match the repair material to the existing system and note any warranty conditions the owner has on file. After the May 9, 2024 storm, whose hail the weather service put at up to six inches across in Johnson City, an owner with roofs of mixed makers and ages, including warehouse roofs and outlet buildings east of I-35, has to sort them by what is actually on each deck.

Choosing a system for the next roof

We install, repair and maintain the systems from these makers, and the right choice follows the building: a TPO sheet on a big low-slope field, or a heavier layered roof where traffic is constant. Owners near the outlet corridor and the business parks on I-35 get to compare options on their own roofs.

Commercial Roofing Questions

Does repairing a roof change its manufacturer warranty?

It can. Some warranties require repairs made with approved materials or by approved applicators, so we look at the paperwork first and match the repair to the terms.

Can one contractor service roofs from different manufacturers?

Yes. A mixed portfolio is normal, and each roof gets materials and details that match its own system.

What if the original manufacturer is unknown?

We identify the membrane by sampling and testing it, then repair with a compatible material. A core cut also shows the insulation and deck underneath.

How do I know a patch will bond to an older sheet?

Weathered membranes often need cleaning or special prep before a patch will hold. We test adhesion on an inconspicuous area and adjust the method to the sheet.

Tell us what is on the roof

Send photos, core results or any paperwork you have on the roof system, and we will map out the repair or replacement path.

Request a Roof Assessment